Ideally suited for combi boilers, PressureSentry provides an audio-visual alert if the system pressure falls below 0.7 bar. This helps to prevent unnecessary boiler shut-downs and repairs, and helps heating and plumbing engineers to avoid costly emergency call outs. The compact device can be fitted to most radiators using a standard half inch BSP screw thread and uses a small battery for the alarm, only drawing power when low pressure is detected. It can be sold as a key benefit to homeowners and easily installed during a routine service call without having to drain the heating system.
PressureSentry conforms to Quality Assurance Control Standard BS EN ISO 9001:2000 and has an 'A' class vendor rating award.
Application
PressureSentry is a compact device that can be fitted into most radiators and is capable of detecting when a heating system falls below a certain pressure. The device, ideally suited for combi boilers, provides an audio-visual alert if the system pressure falls below 1.0 bar. This helps to prevent unnecessary boiler shut-downs and repairs, and helps heating and plumbing engineers to avoid costly emergency call outs. …
Physical Description
PressureSentry consists of a single, compact and non-adjustable unit based on a 24 A/F hex body. This enables the control to be fitted directly into the any radiator. …
Operation
PressureSentry senses pressure through a small orifice at the base of its thread. When the pressure drops below 0.7 bar it will sound an alarm and flash a small LED to alert the homeowner. The sound can be muted but the flashing indicator stays on until the correct system pressure has been reinstated. …
Installation Considerations & Information
PressureSentry can be fitted to any raditor using a standard half inch BSP screw thread and uses a small battery for the alarm, only drawing power when low pressure is detected. The device can be sold as a key benefit to homeowners and easily installed during a routine service call without having to drain the heating system. …
